FE1.1s — USB 2.0 4-Port STT Hub Controller

FE1.1s is a highly integrated, high-quality, and high-performance solution for USB 2.0 High Speed 4-Port Hub. With tiny footprint and extremely low power consumption, it is the best choice for embedded system and standalone hub.

USB-IF 充電架構

FE1.1s could be optionally configured to support Charging Downstream Ports as defined by USB-IF Battery Charging Specification Revision 1.1/1.2. When enabling this feature, a USB hub could be transformed into a charging station for Universal Charging Solution-compliant battery-based portable devices.

客製化 EEPROM

FE1.1s allows EEPROM configuration for customizing Vendor ID, Product ID, Device Release Number, and the number of downstream ports.

品質保證

Quality is guaranteed by Design-For-Testing with comprehensive scan chains and Built-In-Self-Test modes which could exercise all high-, full-, and low-speed Analog Front End (AFE) components at the packaging and testing stages.

FE1.1s 產品簡介PDF icon

聯絡業務 📩

FE1.1s in WQFN24 package Full size image.FE1.1s in WQFN24 package

產品規格

封裝 USB 埠 尺寸 耐溫規格 Transaction Translator (TT)
WQFN-24 4 4x4 mm 商業用規格,
寬溫規格[*],
車載規格[**]		 Single
SSOP-28 4 4x10 mm 商業用規格 Single

商業用規格: 0°C - 70°C
寬溫規格: -40°C, 25°C, 85°C 溫度驗證
車載規格: -40°C- 85°C, 汽車電子協會 AEC-Q100 認證

產品特色

  • Fully compliant with Universal Serial Bus Specification Revision 2.0 (USB 2.0)
  • Upstream Facing Port supports High-Speed (480MHz) and Full-Speed (12MHz) modes
  • 4 Downstream Facing Ports support High-Speed, Full-Speed, and Low-Speed (12MHz) modes
  • Compliant with Universal Charging Solution, and USB Battery Charging Specification 1.1/1.2.
  • Integrated USB 2.0 Transceivers
  • Integrated upstream 1.5KΩ pull-up, downstream 15KΩ pull-down, and serial resistors
  • Integrated 5V to 3.3V and 1.8V regulators
  • Integrated Power-On-Reset with power failure detection circuit
  • Integrated 12MHz Oscillator with feedback resistor and crystal load capacitors
  • Integrated 12MHz-to-480MHz Phase Lock Loop (PLL)
  • Integrated Portable Device detection circuitry for UCS supporting;
  • Board configure support of portable device detection mechanism for Universal Charging Solution on all 4 downstream ports
  • Single Transaction Translator
    • One TT for all downstream ports
    • The TT can handle 64 periodic Start-Split transactions, 32 periodic Complete-Split transactions, and 6 non-periodic transactions
  • Automatic self-power status monitoring
    • Automatic re-enumeration when Self-Powered switching to Bus-Powered
  • Ganged Power Control and Global Over-Current Detection support
  • EEPROM configuration options:
    • Vendor ID, Product ID, Device Release Number
    • Number of Downstream Ports
  • Board configured comprehensive Port Indicators support:
    • Four Downstream Port Enabled indicator LED (Green, one for each port), plus one Active/Suspend indicator LED (Red); or
    • One joint Downstream Port Enabled indicator LED (Green, one for all ports), plus one Active/Suspend indicator LED (Red); or
    • One joint Downstream Port Enabled indicator LED (Green, one for all ports), plus one Charging Request/Portable Device Detection indicator LED (Blue)